| |
HOME
| MOLD REMOVAL SERVICES |
LINKS | FAQ
| CONTACT
US | MOLD ARTICLES
QUALITY AIR | HUMIDEX | ULTRAVIOLET AIR DISINFECTIOIN | FILTRATION |
|
| |
Humidex Humidifiers
A Breath of Fresh Air!
Reduce humidity, create a healthy home. A Humidex Humidifier is your solution for excess humidity and poor air quality. This innovative ventilation unit provides a healthier home environment by improving the air quality and expelling moist air that nurtures molds and creates condensation.
Symptoms of Excess Humidity
Summer
- Dampness, even during dry weather
- Musty basement odor
- Mold and mildew build-up
- Indoor allergic discomfort
- Moisture and dampness on walls, floors and windows
Winter
- Fogged up, sweaty, icy windows
- Water on window sills
- Home heats up slowly
- Cold damp basement
Year Round
- Rotting window frames and sills
- Peeling paint
SOLUTION
An easy, efficient way to reduce the effect of damaging and uncomfortable humidity in your home. It creates a dynamic air exchange that expels humid indoor air, resulting in a comfortable, dry, healthy living environment.
- Remove or reduce pollution sources
- Dilute the concentration of air pollutants and moisture through the increased ventilation of your home.
In other words, install an economical Humidex Ventilation Unit. Your family and home will be glad you did.
|

To Set Up an Appointment:
609-432-9665 |
|
 |
| Humidex Removes Moisture AND Ventilates the Entire Home! |
|
Humidex is a mechanical ventilation unit engineered to exhaust the moist, musty and contaminated air that becomes trapped in the house due to the poor circulation of indoor air. Excess humidity can be removed by heating it, by condensing it, or by ventilating it. Heating and/or condensing excess humidity is expensive and seasonal at best. Ventilating excess humidity with Humidex technology is the inexpensive and most efficient year round solution.
High relative humid air, Molds, Musty Odors and Gases are expelled to the
outside via the Humidex unit, and replaced with Fresh Air from upstairs.
|
| 3 Steps to a Drier Healthier Home |
|
STEP 1
Cool moist air is heavy and will gravitate to the lowest point, namely to the basement of the house. The basement floor is also cold and will condense when in contact with moisture seeping in or coming down. In poorly ventilated areas, the damp air stagnates and creates an environment conducive to mold growth, structural damage and discomfort.
When a Humidex is installed and operating, this stale, humid, contaminated air is drawn to the bottom vents of the unit by a highly precisioned, powerful, yet quiet ventilation fan. This is the distinct uniqueness and effectiveness of Humidex, in that it is directing the effort to the source of the problem and where it persists. |
STEP 2
The moist, polluted heavier air is drawn into the powerful, quiet patented Humidex system. It is then expelled to outside of the house through a 6" duct - similar to a clothes dryer. This flushed out contaminated air is then replaced with a flow of relatively drier, warmer and fresher air drawn downward from the upper levels.The interior air is then replaced with cleaner, fresher outdoor air entering the home naturally via windows, doors, cracks, etc. The warmer replenishment air raises the surface temperature which lowers relative humidity. Humidex continues to expel this moist air until the desired preset humidity level is reached. The unit never shuts off, thus maintaining a constant airflow which prevents dangerous stagnation. |
|
|
STEP 3
Unit is automatically controlled by an adjustable humidistat that regulates the flow of air. When the desired level of humidity is achieved, the fan will reduce speed. It will resume a higher speed if humidity level increases. The direct effect of the air being expelled and the flow of air downwards, creates an air exchange of approximately 10 times a day. As the moisture is drawn off the surface, the moisture absorbed in the walls and floor comes to the surface and is then expelled. In addition to reducing humidity, this reduces mold growth and mildew by not allowing the moist air to stagnate and nurture them. |
To Set Up an Appointment:
609-432-9665
|
HOME
| SERVICES
| LINKS |
FAQ
| CONTACT
US
Tel: 609-432-9665
Copyright © 2008 The Mold Professionals - NJ Mold Removal and Humidex Systems |
 |
|